Went thru much drama but was finally able to get INPA/DIS to connect to other modules (i.e. Airbag, Steering Angle Sensor, etc...) than just Engine and Transmission.

However I still can't connect to the EHC module I am receiving "IFH-0009 No response from controller" in INPA and in DIS something similar 200 error.

I have checked all the fuses for EHC they are fine. Is there a relay for it as well? I'm not sure what else I can do here. I'm guessing the EHC module brain near the battery has actually gone bad. I am going to check the connection and possibly unplug / replug it but I am not very hopeful. I guess I can check the 12V power with a multimeter as well. But not sure i want to go through expense ($100 for a used module on eBay) and hassle of possibly having to code it...

Even if that somehow magically works then I still have a system with a slow leak, a faulty driver side height sensor and possibly a burned out compressor (at the very best 18 years old and weak).

At this point I'm not really sure its worth any more of my time, effort and money to fix this poorly designed system.

Coilovers to the rescue!

__________________
Indy Shops:

Berkeley:
German Auto Sport

Phoenix:
Babbitt Motor Werks | Arizona Bimmer Motor Works

Reno:
Reno Rennsport

Rides:
00 BMW X5 4.4
93 Nissan 300ZXTT
88 Nissan 300ZXT Shiro #853
88 Nissan 300ZXT Shiro #773
84 Nissan 300ZXT 50th AE
78 Datsun 280Z Black Pearl
15 Yamaha WR250R
06 Yamaha R1 AE

Email:
WE350Z at gmail