Yes, I cleared the codes and nothing. Thanks for your reply, you answered my initial question should the engine turn over with a failed gp module. So I went back and tried to ground the body and engine again in a different spot and it turned over. It took me a while to find the ground cable, a lot of post say its on the passengers side, it's not, it is located in the drivers side. It is extremely difficult to remove if you never done it before. One bolt can easily be removed from underneath the car, the other bolt is almost impossible to remove from underneath. I took a couple of extensions and removed the bolt from the top of the engine bay. The actual cable didn't look that bad but it just separated as soon as I tugged it a little bit. I am going to order one one Monday, hopefully this will fix my no start issue.