This Is what I'm working with.. I'll put some comments in red..



E R R O R M E M O R Y R E P O R T -------------------------------------
Date: 02/01/18 18:21:12 ECU: D_EGS JobStatus: --- - API-Job FsLesen: job status error - API-Job FsLesen: job status error
================================================== =========== Ecu : D_0056 IFH-0009: NO RESPONSE FROM CONTROLUNIT ================================================== ================================== Variant: MS430DS0 1 Error in error memory Error registration 1 : 0x005E: Error Sek. air mass meter <<<<!!! Error accurances: 1 Logistic counter : 40 This throws a CEL, brand new German MAF and intake boot, not sure wha this code means yet but I think it has something to do with a bad MAF reading like an intake leak..
Error accure 1st time at:
TCO_ST 28.95 Grad C TIA_ST 28.95 Grad C N_32 1024.00 rpm MAF 245.12 mg/stk aufgetreten vor (rel. BZ) 0.70 h
--- --- --- Error Sek. air mass meter Error to relevant Error debounce Error currently available stat. Error Error code: 5E 78 01 28 67 67 20 2D 45 A2
================================================== ================================== Variant: LWS5_1B >>>>>>>>>> No error found <<<<<<<<<<< ================================================== ================================== Variant: D_00AC -1 Error in error memory ================================================== ================================== Variant: D_0070 -1 Error in error memory ================================================== ================================== Variant: LCM_IV >>>>>>>>>> No error found <<<<<<<<<<< ================================================== ================================== Variant: D_0066 -1 Error in error memory ================================================== ================================== Variant: D_009A -1 Error in error memory ================================================== ================================== Variant: RLS_DS2 >>>>>>>>>> No error found <<<<<<<<<<< ================================================== ================================== Variant: SD_DS2 >>>>>>>>>> No error found <<<<<<<<<<< ================================================== ================================== Variant: EWS3 2 Error in error memory Error registration 1 : 0x000F: power on reset <<<<!!! Error accurances: 1
Sporadic error Error code: 0F 01
------------------------------------------------------------------------------------ Error registration 2 : 0x00FF: general reset <<<<!!! Error accurances: 1
Sporadic error

Error code: FF 01
------------------------------------------------------------------------------------================================================== ================================== Variant: D_00C0 -1 Error in error memory ================================================== ================================== Variant: ZKE3_GM6 6 Error in error memory Error registration 1 : 0x00AD: short circuit mirror motor BT vertical <<<<!!! Error accurances: 1 My passengers side mirror is all messed up electronically.. "vertical" as in my up/down direction does not work from the pad? It doesn't..
Static error
------------------------------------------------------------------------------------ Error registration 2 : 0x00A5: mirror FT, potentiometer horizontal or cable <<<<!!! Error accurances: 14
Sporadic error
------------------------------------------------------------------------------------ Error registration 3 : 0x00A7: mirror BT, potentiometer horizontal or cable <<<<!!! Error accurances: 17
Sporadic error ????
------------------------------------------------------------------------------------ Error registration 4 : 0x0095: interior security: fuse or cable <<<<!!! Error accurances: 9
Sporadic error
------------------------------------------------------------------------------------ Error registration 5 : 0x00A6: mirror BT, potentiometer vertical or cable <<<<!!! Error accurances: 5
Sporadic error ????
The only thing the mirror does right is left/right glass tilt from the pad,
the power folding feature is all wacked out and it does not go up and down etc..
The mirror isn't that much of a priority right now..
------------------------------------------------------------------------------------ Error registration 6 : 0x0065: relay sticking Signal MFBA to ground in the PM BT <<<<!!! Error accurances: 1
Sporadic error
------------------------------------------------------------------------------------================================================== ================================== Variant: D_SZM -1 Error in error memory ================================================== ================================== Variant: MRS4 >>>>>>>>>> No error found <<<<<<<<<<< ================================================== ================================== Variant: IKI 3 Error in error memory Error registration 1 : 0x008D: ATS signal: telegram error or no telegram <<<<!!! Error accurances: 49
-- -- -- -- -- Sporadic error error external ECU Error code: 8D 90 31
------------------------------------------------------------------------------------ Error registration 2 : 0x0092: chime_1 <<<<!!! Error accurances: 114

-- -- Open circuit -- -- Sporadic error --Error code: 92 84 72
------------------------------------------------------------------------------------ Error registration 3 : 0x00BF: IKE-EEPROM error, coding incorrect/incomplete <<<<!!! Error accurances: 0
-- -- -- Invalid working area -- Sporadic error --Error code: BF 88 00
------------------------------------------------------------------------------------================================================== ================================== Variant: SES 1 Error in error memory Error registration 1 : 0x0091: Unknown error location <<<<!!! Error accurances: 31
Static error
================================================== ================================== Variant: IHKA39_5 1 Error in error memory Error registration 1 : 0x001E: Auxiliary water pump <<<<!!! Error accurances: 8 This makes sense and I want to check this pump because my X takes forever for the heat to get hot.. Not that bad but like 2X longer than my other cars.. Looking it up this pump circulates the heater core to get heat faster, I want to figure out how to test this pump soon..
Short circuit to batt+ -- -- -- -- --Error code: 1E 01 08 85 85 00 84 81 0D 03 8D Is this saying the pump motor is just shorted out like possibly burnt up motor or a wire is shorting somewhere?
================================================== ================================== Variant: D_ZUHEIZ -1 Error in error memory ================================================== ================================== Variant: RADIO >>>>>>>>>> No error found <<<<<<<<<<< ================================================== ================================== Variant: D_006A -1 Error in error memory ================================================== ================================== Variant: D_0048 -1 Error in error memory ================================================== ================================== Variant: D_00C8 -1 Error in error memory ================================================== ================================== Variant: BM_WIDE 1 Error in error memory Error registration 1 : 0x0001: watchdog reset <<<<!!! Error accurances: 2
================================================== ================================== Variant: D_00ED -1 Error in error memory ================================================== ================================== Variant: NAVMK4_2 >>>>>>>>>> No error found <<<<<<<<<<< ================================================== ==================================

Variant: D_0048 -1 Error in error memory ================================================== ================================== Variant: NAVMK4_2 >>>>>>>>>> No error found <<<<<<<<<<< ================================================== ================================== Variant: D_00BB -1 Error in error memory ================================================== ================================== Variant: D_SITZ_B -1 Error in error memory ================================================== ================================== Variant: D_SITZ_F -1 Error in error memory ================================================== ================================== Variant: SM53_4 >>>>>>>>>> No error found <<<<<<<<<<< ================================================== ==================================
################################################## ############## This content will stored temporary temporär in ..\inpa\sgdat\na_fs.tmp ################################################## ##############


Priorities are #1 the MAF code throwing a CEL.. It runs perfect but I'd like my CEL off..

#2 My alignment is now crap after replacing some suspension components, I need to figure out how to conclusively check all of my bushings and balljoints so I don't take it in for an alignment to hear they can't align it because it needs this this and this bushing replaced..

#3 Test this aux water pump system..

#4 Screw with that passengers mirror sometime.. Research..

#5 My drivers floorboard is getting a lot of water on it when it rained dripped right onto the deadpedal from the dash.. Need to chase this but it's a frozen wasteland tundra out here so I'll probably have to wait till it's warm out..

#6 sunroof undershade things are wonky.. I only have the front one, I would like to find a replacement rear one in light tan some time.. Fix the rattle my singular shade makes and why does it have a wire on its left rear corner?

#7 My drivers door window gets stuck if I roll it all the way down and something seems loose in the door, like a loose track the glass runs in or something.. I need to pull the door panel and do some exploratory surgery here.. Research..

#8 check licence plate light ding ding ding..



Not too bad of a fixit list..

__________________
06 3.0 X5 auto 103k - 95 M3 - 01 RS25 - 80 931