Quote:
Originally Posted by byM5
Update:
New engine on the way. Will do the following prior to install.
1. valve seals
2. valley pan and pipe.
3. alternator bracket seal
4. rear main seal
5. rear coolant passage cover
6. valve cover gaskets and timing covers
7. eccentric cam sensor seal
8. walnut blast exhaust and intake ports
Anything else?
|
The seal for the oil cooler hose. Also, take a very good look at your motor mounts. And if you have not done this recently on your car, all the coolant hoses, especially the heater hoses that are very hard to get to. Spark plugs, and water pump as well; again depending on mileage. I'd take a close look at the belts and pulleys too.