*Clean Freak Alert*
When installing new rear brake pads, you need to plug in the new brake wear sensor wire on the passenger side. This runs up the suspension to the chassis and towards the back and slips out of view under the fender liner. You have to remove a few fasteners to fold the liner out of the way to get at the connection, remove old and plug in new sensor wire.

BUT lurking behind this liner, at the bottom where it attaches to the body, was a large amount of mud/dirt/dust/stones that had found their way up behind the liner over the years! If you aren't careful while laying under it, lots of this dirt will fall in your eye! I banged on it and scraped and removed a pile of dirt and small pebbles.

What's bothering me is that since the driver side had no sensor, I never opened up the liner, and so that pile of junk is certainly still there on that side... I am going to have to open it and coax it out. Will do it in the driveway this time and keep my garage clean.

__________________
2012 e70 X5 50i MSport "The Boss" black on black *Well Optioned*