Saldip - keep it simple - pick up the right filter, fluid and gasket for your tranny, pull the pan, let it drip over night, cleanup and "dry" everything as well as you can, replace the filter, reseat the pan and gasket, torque to specs and then fill with clean fluid. If your totally in to getting more of the old fluid out, run it for a day (or two) and then just pull the drain plug, empty what comes out and refill again.

You won't get all of the old fluid out but hey, 6 or 8 quarts is way better than nothing.

Not to mention a "power flush", depending on the age of the tranny, can be hard on the internal seals.


Sent from my iPhone using Xoutpost.com