Thanks Purplefade,
I found the intake vanos not pushed in all the way.
I removed it and soaked the o ring in oil and with some twisting and force i got in as far as the others. It started and ran great for about five minutes. It then ran rough and thru code P0022 ( it’s was P0021 last time). So I just cleared the codes and tried again . It is running and up to operating temp with no codes.
Road test next.
If all is good I am going to changes the oil ASAP. I am sure some grime got into the engine in the process of replacing VCG and TC gaskets.
Thanks again fingers crossed.
|