Quote:
Originally Posted by upallnight
Since the compressor is engaging, but there's no cold air from the vents, you will need to find out what the pressures are in the system, the low side pressure and the high side pressure and the ambient temperature when these pressures were read.
|
Hi Upallnight, I am waiting for the manifold guages to showup, but in the meantime, picked up a can of freeon that has a guage. Connected it to the low side and the the guage is in the "green" 40lb ish, outside temp was 96.. Same reading with compressor on and off. So, this is telling me that the system is full and has no leaks.
I had also used DIS to force/turn on the ac compressor and I am 100% sure that the clutch is engaging.
Also, another interesting thing is, I feel like the vents are blowing hot air as if the temp on the climate control unit is set to high/heat..But, the temp is set to 60... Does this indicate that the heater control valve is open?
Thoughts?