Quote:
Originally Posted by fishhouse4
I'll toss the old cap on and watch it for a few days and see what happens.
Attempted to bleed the system again today. Removed cap and loosened bleeder screw. Ran with heat all the way on high. It burped once or twice every 10-20 seconds. Let it run for 6 minutes.
Here's a video (after about 4 min of running) - note the burps around 10 and 30 seconds in.
Is that what it should be doing? Should I let it run longer (it never stopped doing this bubble every 10+ seconds)? |
You need to open the bleeder further. That said, after six minutes if it's only burping like that it should be pretty much done. As someone else said, the hose collapsing is not normal. Checked mine this morning and it looks the same as when hot. Pull the cap when you park it and see how it looks in the morning. I suspect it won't be collapsed and that means it's your cap not venting in and out properly.