Quote:
Originally Posted by Skier1
Hi I will have a go at doing anything , what sort of cleaning would it need . Blowing off with air, wiping with a cloth or using some form of cleanser ?
Thanks
|
You'll have to remove the played from the car, open the case up and then locate the laser (lens). Start with some air, via a camera lens puffer/brush device if possible (NOT compressed air!) then test the results. If still no read then attempt a very careful lens clean with a microfibre cloth and iso-propyl, as shown in this video (although I don't use a screw driver...): -
https://www.youtube.com/watch?v=z25Saj8uNxg
Once dry, re-test again. Not a sure fix but it eliminates the possibility of a dirty lens being the issue. And while you're in there cleaning it you can check the laser sled/arm is clean and free of dust bunnies etc.
