Quote:
Originally Posted by andrewwynn
You can use a decent grade of equivalent size bolt. I think that I have some 3/8" bolts holding mine now.
I also install mine upside down. It's a lot easier to remove/replace the plate with the nuts on the bottom.
Did you leave your plate off for observation, etc or do you think the bolts just aren't tight?
Also: your initial post said only one of the sway links was replaced.
Sent from my iPhone using Tapatalk Pro
|
Correct just 1 link was done. I didn't have the time to do all the Axles myself so I had everything done at a shop.
If these bolts are meant to be replaced when taken off, I'm starting to think the originals were reused and torqued to spec per shop manual. This would explain why the noise is not there until I put some driving on it and they get lose. Also why the sound comes and goes.
I'm hoping this resolves everything on Monday when I take a look. You have been a great help.
Sent from my SM-G965U using Tapatalk