Quote:
Originally Posted by EODguy
Here's a photo of the codes that came up and somehow triggered the suspension to go into transport mode. If yours has the same then you're not going to get it out of transport mode till whatever put it there is fixed (if it's in transport) 
Sent from my SM-A730F using Tapatalk |
used the foxwell also. Did not have any of those codes. I had:
1) 64 EHC: Distortion Plausibility
2) 74 EHC: Accumulator pressure remains constant (accumulator filling requested)
-------------------------------------------------------------------
Additional information:
"4x4" light is on the dash when the car is started. It goes off when the car moves. TPMS light is illuminated and I cannot get it to reset.
---------------------------------------------------------------------
Other values:
Accumulator pressure - 7.52bar
Compressor temp - 90degrees
Voltage Terminal 30 - 13.8V
voltage sensor FL - 1.81V (new reading -this is the one I replaced)
voltage sensor FR - 3.14V
Voltage sensor RL - 2.73V
Voltage Sensor RR - 3.04V
When Vehicle is on the lift (wheels all the way dropped):
Deviation Ride level FL - (-83mm) (new reading - this is the one I replaced)
Deviation Ride level FR - (+138mm)
Deviation Ride level RL - (+172mm)
Deviation Ride level RR - (+192mm)
When Vehicle is on the ground (wheels all the way tucked into the fenders):
Deviation Ride level FL - (-204mm) (new reading - this is the one I replaced)
Deviation Ride level FR - (+20mm)
Deviation Ride level RL - (+45mm)
Deviation Ride level RR - (+63mm)