Quote:
Originally Posted by wpoll
Not only the length is different between the rear and the front - the rear sensor lead has a right-angle joint just before the connector while the front sensor doesn't.
Proper routing is critical or they will seem too short.
|
So I pulled another sensor and measured it against the one already on the car and they were the same length.
It's long enough but not long enough to be clipped in all the mounting points.
If I clip it by the bracket on the strut it is too short and and won't reach the bleeder valve where it slips on.
But if I attach it to the bleeder valve it's not long enough to clip inside the strut bracket.
But there is plenty of length from the connector box (by the fender well) up to the strut bracket.
Sent from my iPhone using Tapatalk Pro