Quote:
Originally Posted by ahair121
I cleared codes and swapped the coils tonight, but the same code persists. I have a few questions. In my OBD reader the MAF shouldn't read a steady 10 g/s right? Also if the MAF was bad the engine should still be able to run without stalling after a minute or so?
|
10 g/s is way too much at idle. It should be around 3-4. Turn off all electric devices (AC, radio, lights) and check it again. You could try unplugging the MAF and it will default to a throttle position map. This will light up your dash like a Christmas tree but if it runs, it will let you know if your MAF is at fault.