Quote:
Originally Posted by mr_robot
How does the upper guide come off?
I see a part for an o-ring as well.
I noticed the bottom half of the dip stick was caked in oil so I'm thinking it's leaking where it joins together.
Also a failed connection between the upper and lower guide tube cause a vacuum leak?
|
There should be a 14mm screw attached to the cylinder head for the upper half. I don't recall exactly how it comes a part but I may still have the old dip stick tube so Ill see if I can remember how I did it. Not sure if I removed the entire dip stick or if I was able to just remove the upper half. Give me a few days and Ill see if I still have the old setup.