My phone camera is so terrible I could get nothing but shots that look like hoth underneath the car where it's located. With my phone flashlight it's clear that the outer CV blew apart, found one of the three pivoting bearings in the road after the mishap.


I've ordered a new CV and I'm hoping once things are open I'll find I haven't messed up the splines in the transfer case, we'll see. Learning from my mistakes.


If any of you know which resource is the most in detail for air susp ride height calculations with INPA I'd appreciate it. The whole process is translated and can be ambiguous IMO in terms of what to punch in at times. A good guide for doing that with INPA I'd appreciate much, I'm going to get searching again as well.


So for now I've ordered the front right axle with new seal, the other front looked ok. I'd also like to order bump stops for the fronts but parts sites like ECS/FCP aren't completely clear on which part may be right. Some just say "not for sport susp." 4.8is has all-4-air and sport suspension from what I gather. Anybody know which front bump stops?


Thanks again for your help guys, this forum is a super resource