Ok I/we got the lug nuts off with this ttps://www.autozone.com/ratchets-sockets-and-wrenches/socket/titan-1-2-in-drive-17-mm-non-marring-lug-nut-socket/453035_0_0 and an old torque wrench. I had some younger relatives over and showed them how to bleed brakes and bust lug nuts loose. Crystalworks I used the dual method of vacuum at bleeder and pumping brake method and it worked great(used 1 liter of fluid) Vacuumed out all old fluid from resevoir. Pads still look very good and rotors measured 28.8-29mm with minimum stamped on edge of 28.4 so I think I'm ok for a while. (After reading on here it seems you can still put a new set of pads on even @ the minimum) I still can't clear the brake message with Carly app.

https://www.amazon.com/America-5060T...+oil+extractor


How do I find which sensor is causing this and can I just put in new sensor on old pads???

FWIW:It has been raining for a week here and I was wondering if water shorted something? Also I just remembered, the last time I drove the back up camera malfunction showed on Idrive screen.