Quote:
Originally Posted by Crowz
The only thing I have connected to it is my foxwell nt510 scanner. It says the module isn't there when I select the air suspension.
I will try to pa soft next just because its the simplest one. If that doesn't work I will get into the old school tools.
I cant see any water standing in the spare tire well itself so I guess I am good there.
Next thing would be to pull the dome from under the spare tire and see if I can read power at the compressor itself plug while opening the door. If it does then the pumps bad if it isn't then I will work my way back.
|
When my pump was in shutdown a little while after my Bag Pipin Andy fix I could bring it back to life with a Creator code reader reset, would work for a few minutes, miles then dead again.
Then I went with the complete cylinder head assembly from Ali a few months ago and have had no problems since and no codes. All 4 bags are good and after a month of inactivity opening my door activates the pump for a slight pump up.
Mike