|
Replaced the rear cover on my LH side Dynamic Xenon headlight. I did it without removing the unit from the car. I am really surprised I was able to get the bottom outboard screw seated and tightened. I started it by hand taped to a T20 socket. I then attached a swivel ratchet extension, and a long extension to tighten. I couldn't believe it actually worked. Cover is on nice and tight. Only thing that gave me a little issue was the wire clip on the inside of the rear cover. I did not install it on the new one as I don't see what good it would do in such a tight space, there's no where for the wires to go anyway. Here's to hoping condensation doesn't rear it's ugly head again.
|