Quote:
Originally Posted by Purplefade
It’s actually two pieces... I had the same issue, my son smacked mine square on the sensor, broke the outside ring and pushed the sensor in to the bumper. I too bought a new mount only to learn that the entire bumper has to come off to do actually put the sensor back correctly.
Needless to say I silicones a chop stick, no shit, a chop stick (was the closest long ski set item I could find to me) to it pulled it back in to place and epoxied it...
Sent from my iPhone using Xoutpost.com
|
I was thinking about epoxy/ jbweld type stuff as the solution. I have SOME access to the area because the previous owner left out the two bottom most screws from the fender liner,so with the one upward facing bolt off I can bend the bumper forwards a bit to let me see the area.
__________________
'10 X5 35d- 279k mi, deleted and DUDMD stage 2, daily and tow vehicle
'01 330i- Drift car: SLR Super angle, BC coils- keep it simple
'07 335i 6mt - Sold @ 171k miles- stage 2 daily commuter for 2 years
|