I literally put a dot of silicone caulk on the chop stick and stick it to the front of the pdc, let it dry and then pulled it up in to place in the bumper and used two part fast set epoxy to finish the job. Once the epoxy set I popped the chop stick off and cleaned the pdc with some non caustic cleaner to remove the last of the silicone. It’s still working to this day and that was probably 5 or 6 years ago that I did it. Sounds janky... but I didn’t have to pull 19 bolts out of the front end, disconnect my headlamp washers and pull the bumper... so, for now (and the last 6 yeas) I’m rolling with it [emoji106]


Sent from my iPhone using Xoutpost.com