View Single Post
  #3  
Old 04-02-2019, 10:23 PM
Fifty150hs Fifty150hs is offline
Member
 
Join Date: Jul 2016
Location: Menlo Park, CA
Posts: 2,311
Fifty150hs is on a distinguished road
Quote:
Originally Posted by andrewwynn View Post
O2 can't range to negative values. The precat if reading negative values something is wrong. Looks like a case of problem sensor.

Also: post cat should gravitate to 0.45V so the 0.75 is very high but that can vary a lot.

What I would do: reset all the sensors by unplug them all, start the car run until you get multiple errors (probably missing O2 heater error) then plug them back in and clear the codes.

See if the numbers will come back into normal range (0.1 to 0.9v).

If you get values outside of normal you probably need to replace the sensor (use OE or OEM don't cheap out: I need to replace my knock off sensors)
I should have said I recently replaced all of my O2 sensors using Bosch replacements.
Reply With Quote

Sponsored Links