So the simple answer is that you want the toe set to 'just a smidge off 0.000'. SO if I use inches or minite-degrees, it is all pretty close. It isnt the number that is important, it is that you want it 'almost to zero, just a bit off'



if you take 0.02" at the outer edge of a 25" wheel/tire. then that is about 0.023 degrees which is about 0 degrees, 1.38 minutes.



https://robrobinette.com/ConvertToeInchesToDegrees.htm




So if you ask for 0.02" or 0.02 degrees, you are good.


Camber is in degrees.


AD and standard are the same, BTW.