Alright, thanks Brad for your input.

Yesterday I picked up the module for the 2nd time from BBA, they said they had found a wire which was causing a short. When I dropped it off to be repaired, I assumed they would test the entire module and repair what's necessary but that does not seem to be the case.

Anyway, installed the module, cleared codes, drove, etc. Same codes are on - front wheels, one has no signal, other implausible. Hooked up my scanner while driving and the rear wheels read intermittently. Reading comes and goes, the front wheels just stay at 0mph all the time.

Not sure what to try next, might swap a wheel speed sensor from front to back and see what that can tell me. In order to get a refund from BBA I would have to remove it for the 3rd time and bring it up there again. The only way they will give me a refund is once a tech says it cannot be repaired. Seems crazy they have to look at it 3 different times to either fix it, or determine it can't be fixed...

Will call some dismantlers tomorrow and try to get a price for a used module.

__________________
2001 BMW X5 4.4i Topaz Blue