Quote:
Originally Posted by daveking
Hi
Just taken the left sender unit out and it has been done.
I moved the float by hand but the gauge did not move from a quarter.
With the pipe off and ignition on fuel pumped out of the pipe.
I am stumped.
Thank you.
Dave king
|
You need to measure the Ω on the sender unit as you change the wiper.
The car uses a buffered signal for the gauge so the needle doesn't bounce around like a lawn mower gauge.
If your needle is stuck at a quarter and there is no gas then your wiper needs attention I wrote a DIY repair for that.
If you have gas on the left but none on the right the siphon jet isn't working usually from the faulty designed o-ring seal.