View Single Post
  #15  
Old 12-30-2019, 06:42 PM
monstersdad monstersdad is offline
Member
 
Join Date: Dec 2019
Location: Reno, NV
Posts: 23
monstersdad is on a distinguished road
Quote:
Originally Posted by andrewwynn View Post
If the bolt that holds the glass to the lifting mechanism gets loose the window will go up and down fine until lower all the way:. Then the back edge tilts in too far and you won't be able to raise the window.

You can usually wrap some gorilla tape around the top edge of the glass to push it forward and the window will operate more or less normally.

When you open up the door you will likely find a very weird almost square nut at the bottom of your door. The bolt that holds the window will rattle loose and bring forth your symptoms.

If the window was able to raise and lower ok until it got stuck it's very likey nothing broken
The window would struggle to go up, but going down it was fine. I was in the drive through and rolled it down to order then rolled it up until I got to the window that's when it wouldn't go back up.
Reply With Quote

Sponsored Links