Quote:
Originally Posted by VW-Fritzi
Oh, do you mean cut a slit in the end of the bolt (the opposite end from the end where the Torx head is), so that a flathead screwdriver can be used on in from above? If so, very interesting. Sounds like taking the fan out may be needed to have enough room for a Dremel to get in there.
|
Yes. That’s what I’m talking about. It’s a popular alteration to that bolt. Just be sure not to cut anything else around it. With the fan removed there should be enough room for you. I believe those two bolts also tighten to 22nm when you reinstall the belt.
Sent from my iPhone using Xoutpost.com