Wrapping the actual pieces are not very difficult or time consuming. The time consuming part of the process is removing all the pieces from the car. The small pieces on either side of the steering wheel just pop off. The glove box trim is riveted in so wrap that in place. The door trim requires panels need to be removed as the trim is held in place by nuts on the back side. The center trim pieces require removing the both carpet panels on each side, popping the idrive control trim, removing the center arm rest, pulling out the cup holder top trim just to get access to the screw holding the trim down. Once the screws are removed, the trim pulls up and out

__________________

VRSF CP & DP | BMS Intake | MHD 2+ Tune | BavSound Stage 1 | 20% Tint