I did the coding that I pasted into Post #8 here, which I got from your posts in the linked thread. The only deviations were the values that were already set to what you had listed. I did add the several entries to the AHM module, and changed the selection "SL_BEI_KZL_AKTIV" from aktiv to nicht_aktiv (as you said, the toggle, not the name itself).

Specifically, you discussed coding the following, which were already set that way on my car, so I did not make any changes to them:

HKL
SCH_FBD -> aktiv
SCH_TOEHKI -> aktiv
TASTER_FBD -> aktiv

FRM (these entries do not exist and must be written in)
LWR_STROM_HALT -> wert_01
LWR_STROM_NORMAL -> wert_01
LWR_STROM_RAMPE -> wert_01

AHM
LAENDERVARIANTE_AHM -> us


I'll go back and review your thread to see if there was any discussion on the zoom feature, but I do not recall any.

Thanks again!