Quote:
Originally Posted by LightlyToasted
If the bushing is indeed failing, what is causing the knocking noise? Is the thrust arm hitting the chassis? One post suggested that the outer and inner metal parts of the bushing were contacting, but I would think that would require the rubber to be so bad as to be easily detectable. If it is the chassis, I wonder if I could jam some foam or something between the two to see if it muffles the noise.
|
In my opinion if bushing is so bad that the arm is hitting the chassis, then you could easily detect it just by looking at it.
Like i said in my previous post, i had no noticable play in bushing nor joint when checking with pry bar. I found out that 1 ball joint had VERY small play when i pulled it/press it with hand.
It was making the same rattle/knocking sound as on the YT video.