View Single Post
  #9  
Old 05-28-2020, 03:11 PM
Redraptor141 Redraptor141 is offline
Member
 
Join Date: Feb 2020
Location: Cornwall, UK
Posts: 90
Redraptor141 is on a distinguished road
Shouldn’t matter regards alignment in regards to rotation. But the “teeth” on the wheel should be directly inline with the end of the sensor. Did you remove the wheel at all? Also have you ensured that the sensor is the same depth/length as the one that you removed? As Too much distance to the wheel would give a reduced signal return.

Did you wipe the codes from the module before attempting a restart? Just depending on fault code the vehicle could start up thinking something is wrong If a legacy code is still stored.

Regards to the misfire codes are all the plugs/coils fitted fully and the coil connectors in place? Sounds Noddy but worth a check, maybe something took a knock?

Theoretically the ZF transmission other than the Park/neutral safety circuit should have no bearing on the engine starting..... unless something hugely mechanical was wrong.... but in those cases I don’t think the engine would even turn over.
__________________
E53 3.0d Sport 119,000 Miles
E61 535d Estate - Hybrid turbos and Dark-side intercooler...389hp,792nm
Reply With Quote

Sponsored Links