Thank you for the e90 thread. Downloaded Ista+, performed the bleeding procedure twice, cranked it once for 30 seconds-had a little sputter(we are moving somewhere), on the second time it fired up very roughly, ran for 10 seconds and died. After that crank and no start again. The only code is the same one from before for the fuel rail pressure on start. I bled the system again through the system-nothing(every time I hear the pump activating in the back).

I removed the supply line to check the fuel-pouring at crank, removed the return line and pouring too at crank. Cracked the first injector fuel line as the manifold is on and it’s the only one I can get to and the was some bubbling and fuel coming out the first time, but after that first rough idle I cracked it open again a few times and while the bleeding system is going I don’t really see fuel pouring.

Again, no start just cracking and the same code. Could it be the fuel pressure sensor or valve? As I get the fuel supply as stated above just not into the rail or combustion chamber for some reason?