Quote:
Originally Posted by NoThanks
on point #2, I replaced both bags with Arnott's a year ago and I'm pretty sure that when I installed the split ring and compression nut on the bags the air line was not able to slide in and out of the bag as you suggest. I didn't torque mine on very tight to get the lines to seat securely. I did cut off the last 10mm or so on each when I changed them due to the pre-existing crimp of the previous compression fitting install.
|
But there is no compression fitting on the line for Arnott bag? The instructions say to just slide the line in to the hole and pull back a tad to lock. Well mine didn't appear to lock, but it didn't come out either when the system was pressurised.