Ok after reading the tech manual I remember what I had to do
There is a resistor on the old motor and I moved it to the new motor and that is all thats required. No coding if you move the resistor over.
Heres the part from the manual covering it.
Quote:
Coding Resistor
Because of mechanical tolerances in produc-
tion, the characteristic curve of the multi-disc
clutch locking torque varies slightly.
Once the actual locking torque has been mea-
sured on the clutch test bench, a resistor is
attached to the servomotor; the resistor's value
is a reference to the locking torque characteris-
tic.
Each time the engine is started, the transfer
case control unit measures the resistance
value once and the optimum program map for
the transfer case fitted is selected.
|