Quote:
Originally Posted by LOWvert
Why did you have to take the liner off?
I have rear airbags and i didnt have to remove the fender liner...
|
I removed every line, bracket, junction, and the wiring associated with the EHC. I had to remove the liner in order to access the rear lines that fed the air tank on the right side of the truck as they were zip tied and went through brackets with other wiring.
Quote:
Originally Posted by LOWvert
I could be wrong, but this looks like it was installed incorrectly.
On my setup, which I installed recently, the camber adjustment was perpendicular to the vehicle/wheel.
|
Hmmm... I hope not. The truck drives straight and aligned fine.
I'll check the right side to see if it is mirrored. I seem to remember the 3 mount bolts would only go in with one orientation.