Update 2 for today. Can not get that code to go away through any method but plugging the EHCII module back in. As soon as I do that everything is hunky dory. But my ride height LED's start blinking again and presumably my draw would return. My head is starting to hurt...

Here's what's going on:



INPA Error (reports same on Foxwell of course)



DXC module initially shows DXC8_E53.C01 and then changes to DXC8_E53.C04 as shown below. It will change after executing any job (coding or reading) but always reverts back to DXC8_E53.C01 when I return. Is that normal?





Here's what the coding options for the module look like. Seems like everything is correct. value_11 is for the correct engine and minus EHCII as shown in some of the other options. Oddly there is no option for N62B48 w/ EHCII. Only N62B44 and all the other E53 variants.

__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log
Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles)

2006 X5 4.8is Build 11/05 Maintenance/Build Log
Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles)

2010 X5 35d Build 02/10
Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles)