View Single Post
  #9  
Old 10-29-2020, 10:23 AM
AceEngineer's Avatar
AceEngineer AceEngineer is offline
Member
 
Join Date: Nov 2017
Location: Albuquerque
Posts: 65
AceEngineer is on a distinguished road
Cool Why not rebuild?

I too will keep the old axle just in case I need it. I just ordered the whole axle because both boots were getting hard and I would have to reboot both ends of the axle. The labor saving was the reason I went with replacement rather than rebuilding the old axle. I saw a uTube video where the guy removed the inner end of the front most suspension link to get the room to remove the axle. His method didn't require breaking a ball joint or releasing the shock from the knuckle. It looked by far the easiest way I've seen to remove and replace the axle, with the added bonus of being the least likely to screw up the alignment. It looks like it will take less than 2 hours to do the R&R myself. Rebooting and regreasing the old axle will just wait until the axle is needed if ever.

AceEngineer
__________________
2008 X3 3.0si My DD
2005 X5 4.4i Better Half's DD
Reply With Quote

Sponsored Links