Quote:
Originally Posted by richardb
Adaptation mixture, bank 1, multiplicative 6.1%
Adaptation mixture, bank 2, multiplicative 6.1%
This sounds consistent with a rich condition generic code (P1093)
How does that MAF value look?
|
As for the MAF of 21kg/hour which means dilly to me since I'm more used to g/s that converts to 5.8333 g/s which kind of high for an airflow at idle.
Airflow through a MAF is used to cool a hot wire or hot film and the DME can determine this base on the current required to heat up the hot wire or hot film.
So when the weather outside is cold, it will take less air flow to cool down the wire or film to a specific temperature.