The hoses are squishy and the drain pan isn't a frozen puck!






It's time to get some coolant in Swampy before the freezing temperatures are back.

I gave everything a quick look to see if anything was blatantly cracked or leaking now that it thawed out but everything seemed fine.

Since it wasn't exactly sure how much fluid I drained from the cooling system before it froze I filled it back up with distilled water and was going to give it another cycle BUT

Long story short I borrowed Swampy's intake boot for another prick car so first I wanted to make this slightly better





A little bit of glue and this will work just fine until I get another new one.





Ran the engine enough to get it warmed up a bit and drained about 3.5 L of water out of there.





Up next, Swampy should be thirsty for about 4 L of this concentrated coolant.





I ended up getting about 4.2 L of the concentrated coolant in the before it was slightly bubbling out of the bleed hole.





Ran the engine another 5 min or so and no leaks that I can see so far.