View Single Post
  #66  
Old 01-27-2021, 02:54 AM
omodos omodos is offline
Member
 
Join Date: Mar 2008
Location: CYPRUS
Posts: 2,040
omodos is on a distinguished road
Quote:
Originally Posted by andrewwynn View Post
They will fail from normal use just fatigue failure unfortunately and I doubt that any difference is achieved from pulling up vs. out. The force that breaks the thing is from the torque applied to the lever/gear, and an argument could be made that when pulling up vs. out it get a more efficient force transfer (true; why it's so much easier to open pulling up), but also that of energy is wasted trying to tip the car over, the force applied to the cable arm hinge is actually less.

I've broken an old DHC during the summer and gently operating the handle. BMW designed the hinge with half the metal around the hinge pins to prevent the pin from getting seized and it turned out to be a design defect because they also used shitty brittle metal because it's easy too fabricate.
ok well either way IF i use a plastic one I dont think it will last the heat out here to be honest, in time it will go brittle -may fall off and cause more damage or a jam you think?
__________________
E53 X5 3.0d SUV prod.date 11/2004 eng.variant M57N Europe Right hand drive N
Reply With Quote

Sponsored Links