Quote:
Originally Posted by oldskewel
I've seen the flow measurement system where they test and compare all injectors against eachother. But what do they do to achieve the actual balancing? E.g., to increase (or decrease?) flows as needed so they are all equal? Just curious.
|
Most shops will measure flow rate at a constant pressure, ultra sound clean, retest and will provide a min +/-5% across the set. Most will flow 2%.
Race set up will give you the same or better but the difference is most controllers will adjust the dwell cycle of the injectors to match cyl to cyl balances. I will let the race engineers explain further.
__________________
2005 X5 4.8IS
The Blue ones are always FASTER....
Current Garage:
2005 X5 4.8is
2002 M5 TiSilver
2003 525iT
1998 528i
Former Garage Stable Highlights
2004 325XiT Sport
1973 De Tomaso Pantera, L Model
1970 Dodge Challenger T/A 4 sp Alpine White
1970 Dodge Challenger T/A 4 sp GoManGo Green
1971 Dart Sport, “Dart Light” package
1969 Road Runner 383
1968 Ply Barracuda 340S FB Sea-foam Green
Last edited by StephenVA; 02-13-2021 at 09:11 PM.
|