Quote:
Originally Posted by crystalworks
If your original SA is as shown in that picture. Your new one should be 212B800108ADE90FS
You would enter that, then delete the last bit in the GM (7 in your case), delete the last bit in the SA (S in your case), and then delete the last bit in VN (E in your case). Click "calculate checksum," and okay.
|
I did all of that and went through the coding process however the Self Leveling error message is still there. There is no longer any sign of EHC anywhere except that pesky warning message on the dash. I wish the air suspension was never taken off. This is monumentally frustrating.