Quote:
Originally Posted by 13brian
Generally (I know you have been through a lot of this) when decelerating causes a noise, it is the pinion bearing. Maybe this helps you with investigation.
|
I'm not familiar with the pinion bearing. I rechecked the wheel bearings, control arms, sway bar, engine mounts...everything appears in order.
Pulled and opened the TC and nothing stood out as damaged. Chain and gears look good, very little slack.
TC video:
https://www.dropbox.com/s/r4305m0eta...551_1.mp4?dl=0
I did damage the TC case because I neglected to remove the output shaft flange before popping the case open. I found a used ATC700 on Ebay so I'll install it when it arrives.