Precisely 350 ft·lb.
I engineered this tool to hold the crank hub so I could tighten with no force on the locking pin which I destroyed attempting to remove the Jesus bolt.
(This was m62tu which has a much different locking pin arrangement and/or shit tons more torque on the JB).
Using the pulley system meant I only had to pull with 30-40# to achieve 350 ft·lb which is less than with my torque multiplier which is one of the most badass tools ever.
To remove; Impact all the way if you can fit it in. Tightening: impossible to beat the torque multiplier but the pulley and scale is a very hard to beat combo.