Quote:
Originally Posted by jac
So I ordered a few clips last time I had to fix the window regulator, which was for one of the front windows. Now one of the rears broke but the clips seem to be different between the front and back. So I figured, I am gonna create my own model for the rear clip, 3d print it and let's see how long it lasts...
Find it here: https://www.prusaprinters.org/prints...ip-51357011680 |
Looks like a difficult part to print!
Due to the sharp right angles I can see multiple stress points, proper layer adhesion is critical (is it possible add a slight chamfer to reduce stress?).
I'd recommend nylon PA12 for the print as you'll have strength and flexibility. Next would be polycarbonate and I wouldn't attempt PLA or ABS.
Cheers