After removing the console, the metal carrier for the wood and all plastic parts from it, I wiped everything down and started applying material to the cracks. One thing I discovered when doing the cracks on the door trims is that the bottle tip itself applies a lot of material that then has to be removed. Fortunately they supply little tips to put the filler in that allows a much smaller amount to be applied. I also found that after applying the material going over it with a plastic razor blade thins the amount of material on the surface. This also helps reduce the amount of sanding.

I then sanded down the applied material starting with 400 grit and working all the way up through the grades to 2000.

These photos show the process.

Attached Images