Quote:
Originally Posted by bcredliner
Does the water temp gauge read normal at operating temp. Also clear the memory. You will have to drive it until the oil reaches operating temp and do some hard acceleration, uphill if possible. Then check for what codes return.
|
The water temp gauge never seems to move - it's always at 'normal'; the engine oil temp is taking longer to reach operating temperature from a cold start, and always shows just less than 100C
Last night I cleared the codes and this is what I got by the time I reached home after work today;
Variant: ME9N62_2 5 Error in error memory
Error registration 1 : 0x2EF5: CDKETS 2EF5 - Kennfeldthermostat, Ansteuerung <<<<!!!
Error accurances: CDKETS 2EF5 - Kennfeldthermostat, Ansteuerung
Error code: 2E F5 64
------------------------------------------------------------------------------------
Error registration 2 : 0x2F71: CDKELS 2F71 - E-Box-Lüfter, Ansteuerung <<<<!!!
Error accurances: CDKELS 2F71 - E-Box-Lüfter, Ansteuerung
Error code: 2F 71 62
------------------------------------------------------------------------------------
Error registration 3 : 0x2EF4: CDKTHS 2EF4 - Kennfeldthermostat, Mechanik <<<<!!!
Error accurances: CDKTHS 2EF4 - Kennfeldthermostat, Mechanik
Error code: 2E F4 42
-------------------------------------------------------------------------------------
so, less than before; minus the fan control error, but still getting errors from the thermostat.
There was a small leak of water when it has been standing in the garage for a few hours - there was a puddle located beneath the expansion tank side, but the tank didn't appear to be wet... again a damp smell when I started it up.