From my understanding they just used PA soft and went into the light control module check control area and unchecked suspension inactive option and I went ahead and read enabled that option. And now I get the suspension level inactive message on the check and troll because of the error in the EHC module for the accumulator pressure sensor.

I suppose I could check the vehicle order in NCS expert and see if it's still there.


I went ahead and ordered four new arnott bags front and rear for sport suspension. I saw some DIYs where they said you could reuse your front struts and just replace the air springs

I also ordered a new accumulator pressure sensor, 4 new ride height sensors, 8 new airline fittings with o-rings,

I'm hoping throwing all this at it will help alleviate the issue

All the airbags that I had in my box from the previous owner had date codes of 2013 so I assumed they would still be okay since they weren't original. They were newer than original but there are definitely leaking because overnight the driver side will be lower than the right side.




Sent from my Pixel 6 Pro using Tapatalk