I was today years old when I realized the power of Bimmercode [Expert] mode. I have successfully coded my 2018 X5 with VLD (Variable Light Distribution), Glare-Free High Beams (Anti-Dazzle Euro), and Rear Fogs.

Bimmercode has allowed me to do great things to my X5 to customize it, but the expert mode with the resources of the world wide web as aided me in some "dig me" items not normal to the regular bimmercode options.

My 2018 X5 50i (with the latest software update from BMWNA which locked my DME and removed by BM3 tune) has KAFAS (connected drive front cameras), Adaptive LED headlights, and other such features that require the options above. I did have to purchase the Euro light switch for the rear fogs ($100 on ebay). I did not have to purchase ECE taillights to make this work. Just purchase the switch, and the rest is coding through Bimmercode Expert. I did not attempt ESYS because I'm not that smart

You do not have to remove/disable the VO of 8S4 or 5AP before performing the coding below in Bimmercode Expert.

VLD instructions
Coding for 8S4 (VLD - works for both HID Xenons and LED adaptive lights):

Body Domain Module > Expert Mode >

3073 LaMaster1 > LUT_FLC_FORWARDLIGHTING_Y > F015_mit_AFS > 0x9C,0x9C,0x9C (check this box)
3073 LaMaster1 > C_FLC_ENA > F015_enable > 0x01 (check this box)


GFHB (Anti-Dazzle) instructions
Coding for 5AP (GFHB - works for LED adaptive lights ONLY):

Body Domain Module > Expert Mode >

3073 LaMaster1 > C_HBA_ENA > F015_enable > 0x01 (check this box)
3073 LaMaster1 > C_HBA_GRHB_ENA > F015_ Highway_Standby_AFS > 0x01 (check this box)
3073 LaMaster1 > C_HBA_ADAPT_SHUT_ENA > F015_enable > 0x01 (check this box)


Rear Fogs (must purchase Euro switch)
Body Domain Module > Expert Mode >

3064 > Mapping_Nebelschlussl_L_output: > nsl_l
3064 > Mapping_Nebelschlussl_R_output: > nsl_r

3068 > NSL_Verbaut: > verbaut

__________________