Quote:
Originally Posted by X5chemist
A flat gasket is easy. The sticky gasket sealer should be applied thinly. For o-rings, I use a glove to coat it. A small q-tip or brush is used on o-ring groves. Never apply too much! The tacky stuff can clog a small orifice. For clean up, use brake cleaner to wipe it up.
This one is my favorite: https://www.permatex.com/products/ga...-liquid-16-oz/
Great on valve cover gaskets! |
So I followed this, refilled coolant last night, so far, no leaks that I could see, but only time will tell, thanks for the advice, I’ll be updating this thread after the car goes threw a couple of heat cycles. Cheers!